Work

Design and Optimization of a Robot for Abrasive Waterjet Polishing of Hydraulic Turbine Blades

Year: 2014
Type: dissertation
Abstract: RESUMEDans l’industrie de fabrication de turbine hydraulique, toutes les surfaces de turbines qui sont en contact avec de l’eau devraient etre polies afin d’obtenir la qualite et l’efficacite maximales. Pour cela, il est necessaire d’utiliser une methode de polissage qui peut avoir acces a toutes les surfaces des turbines incluant leurs bords, leurs zones restreintes et leurs courbures serrees. En raison des proprietes particulieres qu’offre la technique de polissage par jet d’eau abrasif, celle-ci peut etre utilisee pour accomplir cette tâche. Par consequent, dans cette recherche, les proprietes de cette methode non-conventionnelle sont examinees dans un premier temps et les principaux parametres affectant ses performances sont alors determines. Ensuite, les conditions necessaires de manipulations de la buse de pulverisation vis-a-vis des surfaces courbes sont etudiees et les proprietes d’un bras robotise pour manipuler celle-ci sont obtenues afin de realiser cette tâche d’une maniere appropriee. Par apres, plusieurs mecanismes robotiques tels que des mecanismes seriels, paralleles a membrures, paralleles a câbles, et des robots hybrides sont consideres et leurs capacites a etre utilise dans ce processus sont analysees. Il est alors demontre qu’une l’architecture hybride est le meilleur candidat a retenir pour le design d’un robot de polissage par jet d’eau abrasif. Ensuite, l’architecture conceptuelle d’un robot hybride a 5 DDL est proposee. La structure du robot est constituee d’un mecanisme parallele a câbles a 3 DDL et d’un poignet seriel a 2 DDL. Afin d’ameliorer les proprietes cinematiques du mecanisme a câbles tout en minimisant le nombre d’actionneurs necessaires, il est propose d’utiliser des differentiels pour guider ce robot manipulateur. Aussi, la rigidite et la compacite du mecanisme sont ameliorees en utilisant une liaison prismatique. Par la suite, les systemes a câbles differentiels sont examines et les differences entre leurs proprietes cinematiques et celles de systemes actionnes independamment pour chaque câble sont decrites. Il est demontre que la force resultante de tous les câbles d’un differentiel a câbles doit etre prise en compte dans son analyse cinematique. En effet, dans un systeme differentiel planaire, la direction de la force resultante n’est pas fixee vers un point particulier. Mais plutot, elle se deplace dans le plan de ce systeme differentiel. Cette propriete peut etre benefique pour les proprietes cinematiques des robots a câbles. En comparant deux types d’espace de travail de plusieurs robots planaires actionnes par des mecanismes differentiels par rapport a leurs equivalents pleinement actionnes, il est alors montre qu’en utilisant ces mecanismes, les espaces de travail des robots planaires a câbles peuvent etre ameliores. Cependant, cette meme propriete qui augmente la plage de variation de la direction de la force resultante dans un câble differentiel, diminue aussi son amplitude. Ainsi, le design optimal d’un differentiel a câble resulte d’un compromis entre ces deux proprietes.----------ABSTRACT In hydraulic turbine manufacturing, all surfaces of the turbines which are in contact with the water flow should be polished to obtain the desired quality and maximal efficiency. For this, it is needed to use an effective polishing method which can have access to all surfaces of the turbines including edges, narrow areas and tight bends. Because of the particular properties of the abrasive waterjet polishing technique, it can be used to accomplish this task. Therefore, in this research, the properties of this non-conventional method are first investigated and the main parameters affecting its performance are then determined. Next, the manipulation requirements of the jet nozzle over free-form surfaces are studied and the properties of a robotic arm to appropriately perform this task are obtained. Afterwards, several robotic mechanisms, e.g., serial, linkage-driven parallel, cabledriven parallel, and hybrid robots are considered and their abilities to be used in this process are investigated. It is then shown that a hybrid architecture is the best candidate for the design of an abrasive waterjet polishing robot. Next, the conceptual design of a 5-DOF hybrid robot is proposed. The structure of this robot is made of a 3-DOF cable-driven parallel mechanism and a 2-DOF serial wrist. To improve the kinematic properties of the cable-driven mechanism while the number of required actuators is kept at a minimum, it is proposed to use cable differentials to drive this manipulator. Also, the rigidity and compactness of the mechanism is improved through the use of a prismatic joint in its structure. Afterwards, differentially driven cable systems are investigated and the differences between their kinematic properties and these of independently actuated cables are described. It is shown that the resultant force of all cables of a cable differential should be taken into account in its kinematic analysis. Indeed, in a planar differential, the direction of the resultant force is not fixed toward a particular point. Instead, it moves within the plane of that differential. This property can be beneficial in the kinematic properties of differentially driven cable robots. By comparing two types of workspaces of several planar robots actuated by differentials with their fully actuated counterparts, it is then shown that using these mechanisms, these workspaces of planar cable robots can be improved. However, the same property that increases the range of variation of the resultant force direction in a cable differential, decreases its magnitude. Thus, the optimal design of a cable differential is a trade-off between these two properties. Next, a synthesis method is presented to find all possible arrangements of the cable differentials to generalize the idea of using such mechanisms in the design of planar cable robots. Additionally, the application of differentials in spatial robots is also investigated and it is shown that they have properties similar to the planar types.
Language: English
Open Access status: green
OpenAlex ID: W2293439180
Cites: 124
Cited by: 1
Related to: 10