Development of an Obstacle Detection and Avoidance System for ROV
Year: 2018
Type: dissertation
Abstract: Unmanned underwater vehicles, such as remotely operated vehicles (ROVs) and autonomous\nunderwater vehicles (AUVs) are commonly used for inspection, maintenance and repair\n(IMR) missions in the oil and gas industry. This is a cost-driven industry and advances in\nautonomy is a key factor to reduce the mission expenses.\nCollision avoidance is one of the main challenges in the field of AUVs. In this thesis a\nsystem for detecting obstacles and planning a new path around the obstacles is proposed.\nThe system is divided into three modules: an object detection module, a collision avoidance module and a guidance module.\nThe object detection module uses a single-beam mechanically scanning sonar to populate a probabilistic occupancy grid. The sonar data is related to the probability of occupancy through a dynamic inverse-sonar model. The occupancy grid is vehicle-fixed and\nthus position or velocity data is needed for translating and turning the grid. The translation\nand rotation is archived using an image processing technique known as affine transformation.\nA global occupancy grid has to account for the growth of the positional uncertainty,\nand thus the accuracy of the map will fall over time. With a local map the obstacles will be\ncorrectly located with respect to the vehicle, which is sufficient for the purpose of collision\navoidance. The obstacles are detected through a contour detection algorithm. The detected\ncontours are then expanded to make a safety margin around the obstacles.\nThe collision avoidance module compares the current path with the detected obstacles\nand initiates a path recalculation if they coincide. The path recalculation is done with\na combination of Voronoi diagrams and a modified version of Dijkstra s shortest path\nalgorithm. Once a new path is calculated, it is smoothed using Fermat s spiral and sent to\nthe guidance system.\nThe guidance system is a classic line of sight guidance scheme, with a velocity dependent lookahead distance. The velocity guidance uses the path curvature as an input\nparameter. This enables the guidance system to reduce the commanded velocity when\nsharp turns are detected.\nSeveral simulations were performed and the complete system was tested on a ROV\nstationed on the Snorre B oil field. During the field experiments, it was confirmed that\na mechanically scanning single-beam sonar is sufficient as the only sensor for detecting\nand avoiding obstacles in an underwater environment. The technology is also applicable\nto AUVs as the calculated paths have a continuous curvature.\nRegarding further developments of this system, it is suggested to look into other guidance schemes, such as trajectory tracking. The object detection system would benefit from\nintroducing additional sensors, such as cameras for detection of close obstacles.
Author: Ørjan Grefstad
Language: English
Subfield: Control and Systems Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W2899424487
