Year: 2023
Type: dissertation
Abstract: What the manipulator can perform is determined by what the end-effectors, including the robotic hand, can do because it is the gateway that directly interacts with the surrounding environment or objects. In order for robots to have human-level task performance in a human-centered environment, the robotic hand with human-hand-level capabilities is essential. Here, the human-hand-level capabilities include not only force-speed, and dexterity, but also size and weight. However, to our knowledge, no robotic hand exists that simultaneously realizes the weight, size, force, and dexterity of the human hand and continues to remain a challenge. In this thesis, to improve the performance of the robotic hand, the modular robotic finger design with three novel mechanisms based on the musculoskeletal characteristics of the human hand was proposed. \n \n First, the tendon-driven robotic finger with intrinsic/extrinsic actuator arrangement like the muscle arrangement of the human hand was proposed and analyzed. The robotic finger consists of five different tendons and ligaments. By analyzing the fingertip speed while a human is performing various object grasping motions, the actuators of the robotic finger were separated into intrinsic actuators responsible for slow motion and an extrinsic actuator that performs the motions requiring both large force and high speed. \n \nSecond, elastomeric continuously variable transmission (ElaCVT), a new concept relating to continuously variable transmission (CVT), was designed to improve the performance of the electric motors remaining weight and size and applied as an extrinsic actuator of the robotic finger. The primary purpose of ElaCVT is to expand the operating region of a twisted string actuator (TSA) and duplicate the force-velocity curve of the muscles by passively changing the reduction ratio according to the external load applied to the end of the TSA. A combination of ElaCVT and TSA (ElaCVT-TSA) is proposed as a linear actuator. With ElaCVT-TSA, an expansion of the operating region of electric motors to the operating region of the muscles was experimentally demonstrated. \n \nFinally, as the flexion/extension joints of the robotic finger, anthropomorphic rolling contact joint, which mimicked the structures of the human finger joint like tongue-and-groove, and collateral ligaments, was proposed. As compliant joints not only compensate for the lack of actuated degrees of freedom of an under-actuated system and improve grasp stability but also prevent system failure from unexpected contacts, various types of compliant joints have been applied to end-effectors. Although joint compliance increases the success rate of power grasping, when the finger wraps around large objects, it can reduce the grasping success rate in pinch gripping when dealing with small objects using the fingertips. To overcome this drawback, anthropomorphic rolling contact joint is designed to passively adjust the torsional stiffness according to the joint angle without additional weight and space. With the anthropomorphic rolling contact joint, the stability of pinch grasping improved.
Author: 김승연
Institution: Seoul National University
Language: English
Subfield: Biomedical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W7052148498
