Work

Optimisation, Fabrication and Characterisation of AlGaN/GaN HEMTs

Year: 2026
Type: dissertation
Abstract: This thesis investigates the process optimisation, fabrication, and electrical char- acterisation of AlGaN/GaN high-electron mobility transistors (HEMTs). Before device fabrication, etching processes for AlGaN recess structures were optimised, followed by an analysis of SiNx and Al2O3 for use in device isolation and in the gate stack. The fabricated devices incorporated intentional variations in their geometry. The influence of these variations was studied during the electrical characterisation of the devices. The fabricated HEMTs demonstrated functional transistor operation with on- current and transconductance values of approximately Ion ∼ 300 mA/mm and gm ∼ 100 mS/mm at VD = 3 V. Increased source and drain recess depths were observed to reduce on-resistance, while increased gate recess depths showed to shift the devices towards normally-off behaviour, consistent with trends reported in the literature. The devices exhibited low breakdown voltages and high leakage currents, which were attributed to limitations in the SiNx passivation quality and a significant buffer conductivity. Field plate structures showed limited improvement in break- down performance, indicating that further optimisation of their fabrication and integration may be required. Overall, this work demonstrates the successful fabrication and characterisa- tion of AlGaN/GaN HEMTs while identifying several process limitations affecting leakage, breakdown behaviour, and device variability. The results guide future process optimisation of GaN-based transistor technologies.
Institution: Lund University
Language: English
Open Access status: green
OpenAlex ID: W7165432046
Cites: 49
Cited by:
Related to: 10