Citrate-Controlled Copper Electrodeposition in a Cu-Ni Single Electrolyte: Kinetics, Film Composition, and Mechanism
Year: 2026
Type: article
Abstract: Citrate-based Cu-Ni electrolytes are widely used for the electrodeposition of Cu-rich Ni1−xCux alloys and Cu/Ni multilayers, yet the influence of citrate speciation on copper deposition kinetics remains poorly understood. In this work, copper electrodeposition from electrolytes containing 0.025 M CuSO₄, 0.7 M NiSO₄, and 0-0.5 M Na₃Cit was investigated using chemical speciation modelling, rotating-disk-electrode measurements, Koutecký-Levich analysis, and thin-film characterization. Increasing citrate concentration progressively converted free Cu²⁺ into Cu(II)-citrate complexes and significantly reduced the copper deposition current. Kinetic analysis revealed a transition from diffusion-limited deposition in citrate-free and low-citrate electrolytes to a mixed kinetic mass-transport regime at higher citrate concentrations, where the current plateau fell below the bulk diffusion limit. Copper films deposited from citrate-containing electrolytes exhibited smoother morphologies but also substantial incorporation of C, H, and O species throughout the film thickness. Depth profiling by SIMS and ToF-EERD showed a decrease in Cu purity from approximately 98 to 87 at.% with increasing citrate concentration. These findings support a mechanism in which Cu(I)-citrate intermediates form a gel-like Cu(I)-Cu(II)-Ni(II)-citrate interphase that regulates copper deposition through coupled kinetic and mass-transport limitations.
Institutions: KU Leuven, K1-MET GmbH (Austria), IMEC
Language: English
Subfield: Surfaces, Coatings and Films
Field: Materials Science
Domain: Physical Sciences
Open Access status: bronze
OpenAlex ID: W7235757565
