Work

The moisture absorption of additively manufactured short carbon fibre reinforced polyamide

Year: 2024
Type: article
Abstract: • The moisture diffusivity of 3D printed composites increases with the number of inter-layer interfaces. • Absorbed moisture results in more significant degradation of the tensile properties of the printed samples compared to the injection moulded samples due to the changes in the microstructure. • The tensile modulus and the shear modulus of 3D printed samples are not recovered after drying due to permanent degradation of the interfaces. Polymer composites are commonly exposed to moisture and undergo reductions in mechanical properties. It is challenging to describe the moisture absorption dynamics of 3D printed parts due to manufacture-induced microstructures. This work investigates the moisture absorption of printed short carbon fibre reinforced polyamide (SFRP) with varied microstructures and its impact on mechanical properties. The printed SFRP have inferior microstructures and diffusivity increases with the number of interlayer interfaces by up to 119%, which is 258% higher than that of compression moulded composite. The yield stress and tensile modulus of SFRP decrease by up to 59% and 79%, respectively. This deterioration is irreversible and more significant than injection moulded samples as the microstructure is permanently degraded by moisture. Additionally, the shear moduli of printed polyamide and SFRP decrease by up to 63% and 74%, respectively. The results are crucial for prediction, evaluation, and maintenance of 3D printed applications in humid conditions.
Language: English
Open Access status: hybrid
Estimated APC paid: $4,520
OpenAlex ID: W4403432829
FWCI: 2.043
Cites: 68
Cited by: 15
Related to: 9