Get started
Author

P. Krishna Menon

Observed names: P Krishna Menon, P. K. Menon, Parappurath Krishna Menon
Observed institution: Research Centre Imarat
ORCID: 0000-0003-4573-5396
Observed ORCID: 0000-0003-4573-5396
OpenAlex ID: A5086787525
Influence of fabrication tolerances on performance characteristics of a MEMS gyroscope
2020 · Arnab Biswas, Vishal S. Pawar, et al. · Microsystem Technologies · 22
Sensitivity analysis of an in-plane MEMS vibratory gyroscope
2017 · P. Krishna Menon, Jagannath Nayak, et al. · Microsystem Technologies · 19
Aging Effects of KOH+NH2OH Solution on the Etching Characteristics of Silicon
2019 · Avvaru Venkata Narasimha Rao, Prem Pal, et al. · ECS Journal of Solid State Science and Technology · 11
PDF
A study on chromium thin film with positive photoresist as a masking layer towards the wet bulk micromachining of Borofloat glass
2024 · Vishal Sahu, Priyanka Dewangan, et al. · Micro and Nano Systems Letters · 9
PDF
On the Realization of Self-Sensing Piezoelectric MEMS Actuators
2019 · Sudhanshu Tiwari, Randhir Kumar, et al. · International Conference on Manipulation, Automation and Robotics at Small Scales (MARSS) · 8
Study of masking layer behavior towards bulk micromachining of Borofloat glass
2023 · Adarsh Nigam, Vishal Sahu, et al. · Materials Today Proceedings · 7
Fabrication of microchannels and through-holes in Borofloat glass using Cr thin film with positive photoresist as the masking layer through wet etching
2024 · Vishal Sahu, Priyanka Dewangan, et al. · Materials Today Communications · 6
High Speed Silicon Wet Bulk Micromachining of Si{111} in KOH Based Solution
2020 · Avvaru Venkata Narasimha Rao, Prem Pal, et al. · Symposium on Design, Test, Integration & Packaging of MEMS and MOEMS (DTIP) · 5
Effect of concentration change of 0.1% triton added 25 wt% TMAH during fabrication of deep cavities with mesa structures in SOI wafer
2020 · P. Krishna Menon, Akarapu Ashok, et al. · Microelectronic Engineering · 5
Different Beam Configurations for Compliant Mechanism-Based MEMS Accelerometer
2022 · Nikul Jani, Mithlesh Kumar, et al. · Mechanisms and machine science · 4
High speed etching of silicon in KOH + NH 2 OH solution at lower temperatures for the fabrication of through holes in silicon wafer
2020 · Parappurath Krishna Menon, Avvaru Venkata Narasimha Rao, et al. · Micro & Nano Letters · 4
Study of Curved Beam Based Displacement Amplifying Compliant Mechanism for Accelerometer Design
2022 · Mithlesh Kumar, P. Krishna Menon, et al. · Mechanisms and machine science · 3
Parametric Tuning of Natural Frequencies of Tuning Fork Gyroscope
2022 · Rakesha Chandra Dash, Rakesh Tirupathi, et al. · Mechanisms and machine science · 3
Influence of scalloping on electrostatic forces in comb drive microdevices
2019 · V. S. Pawar, P. K. Menon, et al. · ISSS Journal of Micro and Smart Systems · 3
Modelling and optimization of compound lever-based displacement amplifier in a MEMS accelerometer
2024 · Nikul Jani, Rakesh Tirupathi, et al. · Microsystem Technologies · 2
Closed Loop Sense Feedback Control for a Dual Proof Mass MEMS Vibratory Gyroscope
2024 · Vaibhav Dhar Dwivedi, Amrit Kumar Mishra, et al. · Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS · 2
Lever-Bridge Type Design of Compliant Displacement Amplifier for MEMS Accelerometer
2025 · Nikul Jani, Rakesh Tirupathi, et al. · Mechanisms and machine science · 1
Force-Amplifying Compliant Mechanism for Closed-Loop MEMS Accelerometer
2024 · Nikul Jani, Sai Kishore Jujjuvarapu, et al. · IEEE Sensors Letters · 1
Optimization and analysis of a closed-loop MEMS accelerometer with enhanced bandwidth
2024 · Nikul Jani, P. Krishna Menon, et al. · IEEE Applied Sensing Conference (APSCON) · 1
Open and Closed-Loop Analysis of Single-Axis MEMS Vibratory Gyroscope with Centrally Supported Proof Mass
2025 · Amrit Kumar Mishra, Vaibhav Dhar Dwivedi, et al. · Lecture notes in mechanical engineering
Closed-Loop Differential Capacitive MEMS Accelerometer with a Compound Lever-Based Compliant Mechanism
2025 · Nikul Jani, Sai Kishore Jujjuvarapu, et al. · Lecture notes in mechanical engineering
Works count: 21
Citation count: 116
H-index: 6
I10-index: 3
Year
Topic
Type